2016 BOBCAT T630

2016

1,900

Used

A10

2016 Bobcat Skid Steer Compact Loader, Kubota Diesel Engine, Liquid Cooled, 74HP, Turbo Charged, Fully Hydrostatic, Rubber Track Drive, AC, & LoJack, All-Maintenance Points Serviced! 1,900 hours, Ready to work! Engine -Make: Kubota -Model: V3307-DI-TE3 -Engine Tier: Interim Tier IV -Fuel: Diesel -Cooling: Liquid -Horsepower: SAE J1995 Gross - 74.3 HP @2400 RPM | ISO 9249 EEC / SAE J1349 Net - 70.3 HP @2400 RPM -Torque: SAE J1995 Gross - 195.0 ft.-lb. @1600 RPM | ISO 9249 EEC / SAE J1349 Net - 186.7 ft.-lb. @1600 RPM -Low Idle RPM: 1250 - 1450 -High Idle RPM: 2525 - 2650 -Number of Cylinders: 4 -Displacement: 203 cu. in. -Bore / Stroke: 3.70 in. / 4.72 in. -Lubrication: Gear Pump Pressure System with Filter -Crankcase Ventilation: Closed Breathing -Air Cleaner: Dry replaceable paper cartridge with separate safety element -Ignition: Diesel - Compression -Air Induction: Turbo-Charged -Engine Coolant: Propylene Glycol / Water Mixture -Starting Aid: Glow Plugs - Automatically activated as needed in RUN position. Drive System -Main Drive: Fully hydrostatic, rubber track drive -Transmission: Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic drive motors -Tracks (Tension): Grease cylinder and spring Controls -Vehicle Steering: Direction and speed controlled by two hand operated steering levers or optional joystick(s) Loader Hydraulics -Lift and Tilt: Controlled by separate foot pedals or optional Advanced Control System (ACS) -Front Auxiliary: Controlled by electrical switch on Right Hand steering lever or joystick -Auxiliary Pressure Release: Pressure relieved through quick couplers; Push couplers in, hold for 5 seconds -Engine: Hand lever speed control; key-type start switch or optional Deluxe Instrumentation Panel and function error shutdown. -Starting Aid: Glow plugs automatically activated as needed by Instrument Panel -Service Brake: Two independent hydrostatic systems controlled by two hand operated steering evers or optional joystick(s) -Secondary Brake: One of the hydrostatic transmissions -Parking Brake (Standard): Spring applied pressure release multi-disk brake activated by manually operated switch on left instrument panel Hydraulic System -Pump Type: Engine driven, gear type -Pump Capacity - Standard: 23.0 GPM -Pump Capacity - High-Flow Option: 30.5 GPM -System Relief at Quick Couplers: 3450 - 3550 PSI -Filter (Hydraulic / Hydrostatic): Replaceable beta 10 micron = 200, drop in element -Filter (Charge): Replaceable beta 10 micron = 200, drop in element Hydraulic Cylinders: Double-acting; tilt cylinders have cushioning feature on dump and rollback -Bore Diameter: Lift Cylinder (2) - 2.50 in. | Tilt Cylinder (2) - 3.00 in. -Rod Diameter: Lift Cylinder (2) - 1.75 in. | Tilt Cylinder (2) - 1.63 in. -Stroke: Lift Cylinder (2) - 33.87 in. | Tilt Cylinder (2) - 13.97 in. -Control Valve - Standard: 3-Spool, open center, manually operated with spring detent for lift float and electrically controlled auxiliary spool -Control Valve - ACS and SJC: 3-Spool, open center with electric actuator controlled lift with float and tilt. Electrically controlled auxiliary spool -Fluid Lines: SAE Standard tubelines, hoses and fittings -Fluid Type: BOBCAT FLUID, Hydraulic / Hydrostatic | 6903117 - (Two - 2.5 Gal.) | 6903118 - (5 Gal.) | 6903119 - (55 Gal.) Hydraulic Function Time -Raise Lift Arms: 3.4 Seconds -Lower Lift Arms: 3.0 Seconds -Bucket Dump: 2.3 Seconds -Bucket Rollback: 1.7 Seconds Capacities -Fuel: 27.3 Gal. -Engine Oil with Filter Change: 12.0 qt. -Engine Cooling System: with Heater - 3.1 Gal. | without Heater - 3.0 Gal. -Hydraulic / Hydrostatic Reservoir: 2.7 Gal. -Hydraulic / Hydrostatic System: 11.0 Gal. -Hydrostatic Drive Motor (Each): 7.1 fl. oz. (NOTE: AVAILABLE ONLY VIA APPOINTMENT. PLEASE GET IN TOUCH AND SCHEDULE AN APPOINTMENT.)

27.3 gal

Yes

12.6 in

Rubber

Enclosed

Yes

Foot

Suspension

74.3 HP

Kubota

V3307-DI-TE3

Diesel

USA Tier 4

Yes