2026 BANDIT 2680T BEAST RECYCLER

2026

New

990-RC1298-879 Caterpillar C18, 755 hp without clutch- T4 FINAL 333-32273 Standard Imron Industrial Urethane Bandit Yellow Paint 990-1012-43 Caterpillar 320L steel tracks (600MM/double grouser) 977-6000-09 755 hp C-18 Tier 4 Final Engine 977-100335 HPT014 PT Tech Fluid clutch (476 to 765 hp) BEAST-25-0001 30 tooth standard cuttermill OPTION-978-5000-19 SHINGLE MACHINE OPTION (2680) 977-201031 SET UP Gate, 1" RD 1815 3/4" Thick D/C 977-200010 SET UP Screen, 2" RD 3/4 Thick 26/3680 977-3061-62 SET UP Cutterbody, Replaceable Raker Swept Beam 30TM B 900-9915-04 SETUP Teeth, 2" W Double Splitter USE 900-9915-04B 900-9916-06 SET UP Teeth, 2" W Double Short Shingle Fan USE 900-99 977-2012-02 SET UP Raker, 2.5" W HD Weld 30TM 900-4902-78 SET UP bolt, 3/4"-10 x 2-1/2" (for anvil w/ thick back) 900-4918-11 SET UP 3/4-16 X 2-1/4 G8 HEX BOLT BULK The Beast® Model 2680XP track features the same cuttermill as the 3680XP track but comes in a more compact size and lighter weight weighing around 68,000 pounds. The 2680XP track is equipped with a Caterpillar C18, 755 horsepower engine, 42” diameter by 63” wide cuttermill, and a 35" high x 60" wide mill opening. This machine uses a 30 or 60-tooth cuttermill running Bandit’s saw-tooth style cutterbodies that regulate the size of the tooth’s bite. Most of the material is sized in the initial cut, so material exits the large screening area quicker. The cuttermill on the 2680XP track is larger in diameter compared to most competitive grinders allowing it to process larger diameter material with less vibration while using less horsepower and fuel. A wide variety of tooth and screen options are available to adequately process and size material. A single screen and gate can easily be changed from the side of the grinding chamber while utilizing the standard screen changing arm. The 2680XP track comes equipped with a Caterpillar 320L steel track undercarriage and all track and grinding functions are controlled with a wireless radio remote control with tether back-up. A 12' 10" long x 60" infeed with double slat design track style infeed conveyor provides ample room for feeding a wide variety of material. A 20" diameter feed wheel further assists with pulling material into the mill. Proportional feed is also standard with 6-speed adjustments to allow for maximum productivity and fuel efficiency.