2020 DEERE 1050K WH (Reconditioned)

2020

4,945

LF388244

Used

Accurate / Verified

D2404A

Reconditioned

RECONDITIONED DEERE 1050K WH Dozer with Factory Waste Handling Landfill Arrangement, Complete NEW Undercarriage Installed, SU Blade w/ Trash Rack, This Unit has been through our "Marcel Reconditioning Process" and All Needed Repairs & Servicing has been Completed. A Very Clean, Straight, Work Ready Dozer. RECONDITIONED DEERE 1050K Waste Handling Dozer Landfill Arrangement • Factory Waste Handler (Landfill) Package • Deere PowerTech PSS 6135 Engine • Auto Engine Shutdown • Hydrostatic Transmission • Automatic Reversing Fan • Cab (ROPS) w/ A/C • Tilting Cab • Complete NEW Undercarriage Installed • 26" Trapezoidal Shoes • SU Blade w/ Trash Rack • Rear Storage Box w/Striker Bars • Final Drive Trash Guards • Rotary Ejector Engine Pre-Cleaner • Environmental Drain Package • Quick Service Ports • Beacon Light • Rated at 350 HP • Weight 96,000 LBS When unit arrived in our yard, MEL completed the following: • Removed all panels from machine and power washed • Completed thorough machine inspection • Complete Machine Service • Cut open, inspected and replaced all oil filters (Engine, Hydrostatic Transmission, Steering, Hydraulic) & inspected for contaminates - All clean • Serviced Fuel system • Inspect all magnetic plugs/screens & suction screens - all clean • Check final drive oil levels and oil condition Completed the following pressure checks to ensure within OEM spec: • Engine rpm high & low idle • Engine oil high & low idle pressures • Fuel pressure • Full stall boost • Stall speeds - single / double • Boost - single / double stall • Transmission pump pressure / lube pressure • Torque inlet / outlet pressures • Lock-up & Impeller clutch pressures • Steering pressure checks • Main relief pressure • Front / Rear brake pressures All Pressures were within OEM Specifications Based on Our Inspection, MEL has completed the following repairs: • Replaced All machine fluids with Manufacturer recommended Engine, Hydrostatic Transmission, Hydraulic and Final drive oils • Replaced Coolant • Replaced Complete Undercarriage • Pulled Track frames & Rebuilt with NEW Bogies • Replaced Hard Bar Pins & Bushings • Resealed both Track adjusters & Inspected wear plates • Replaced Pivot Shaft seals • Exhaust Filter Cleaned • Replaced Def filters & Def tank breather • Replaced Def Header • Replaced Def Injector • Cleaned & filled Def tank • EGR valve cleaned & NEW gaskets installed • Replaced Fuel tank, Hydraulic and Hydrostatic tank breathers • Cleaned Crankcase breather • Clean Nox sensors & Temp sensors • Clean all Battery terminals & grounds • Replace Engine Belt • Replaced Alternator • Check & Repair all Cab Electrical functions • Check & Repair all Machine Electrical functions, Secured all wiring • Resealed both Lift Cylinders • Resealed Hydrostatic Manifold Block • Repaired All Hydraulic & Hydrostatic Leaks • Replaced all Worn / Damaged Hoses • Completed Hydrostatic Pump & Motor Calibrations • Clean HVAC • Check / Repair all Grease fittings & lines • Disassemble, check & repair Operator Seat • Repair all Door latches & handles • Checked & Secured all Fuel & Hydraulic/Transmission lines • Installed NEW engine door seals • Replaced damaged Cab door seals • Checked, Cleaned & Repaired A/C system • Completed all Needed Cab interior repairs • Replaced all Blade Pins - Blade is tight • Completed needed Blade welding repairs • Blade Installed, Properly shimmed & Calibrated • Completed all Needed machine cosmetic repairs • All steps, grab handles, panels & Belly pans straight and in place • All Needed Repairs & Servicing has Been Completed • Complete Machine has been Sandblasted, Primed & Painted This machine is Completed & Work Ready

Yes

Semi U

Single Shank

Yes

100

Steel

100

26 in

100

100

100

100

Yes

Enclosed

350 HP

Hydro

4945