2020 HITACHI ZX345US LC-6N

2020

3,800

10317

Used

10317

This is the one you've been looking for! Low hours, hydraulic coupler, auxillary hydraulics, definition of a baby doll! We've gone through this unit tip to tail changing all the filters and fluids on her. She's ready to be a digging machine on your jobsite. Engine Model: Isuzu 6HK1 (6-cylinder, 4-cycle, water-cooled, common-rail direct injection) Aspiration: Turbocharged with air-to-air charge air cooler (some references note variable geometry turbocharged, intercooled, cooled EGR) Gross Power: 264 hp @ 1,900 rpm Net Power: 249 hp @ 1,900 rmp Maximum Torque: 774 lb-ft @ 1,500 rpm Displacement: 476 cu in (approx. 475–476 cu in) Emissions: EPA Final Tier 4 / EU Stage IV (no DPF required) Hydraulics System Type: Open-center, load-sensing TRIAS II three-pump system Main Pumps: 3 variable-displacement axial-piston pumps Maximum flow: 2 × 62 gal/min + 1 × 56 gal/min (approx.) Pilot Pump: 1 gear pump, max flow approx. 9.6 gal/min Operating Pressures: Implement: 4,97psi Swing Mechanism: Axial-piston motor with planetary reduction; swing speed 10.5 rpm; swing torque 66,750 lb-ft Travel: 2-speed axial-piston motors per track (automatic shift); max travel speed 1.6 mph (low) / 2.5 mph (high); drawbar pull 66,990 lb Controls: Pilot levers (low-effort hydraulic pilot controls) Machine Weight Operating Weight: Approximately 78,710–79,146 lb (depending on configuration, including full fuel, operator, standard 1.63 yd³ bucket, counterweight, and 32 in triple-grouser shoes) Ground Pressure: Approx. 7.3 psi (with 32 in shoes) Transportation Dimensions (approximate, with arm attached; varies slightly by arm length) Overall Length: 32 ft 8 in – 32 ft 10 Overall Height: 11 ft – 11 ft 3 in (to top of boom/cab area) Overall Width: 11 ft 1 in (with 32 in shoes) Rear-End Swing Radius (reduced-tail-swing design): 6 ft 10 in Track/Undercarriage Length: 16 ft 2 in Ground Clearance: 20 in Counterweight Clearance: 3 ft 10 in Upperstructure Width: 10 ft Working Dimensions (digging ranges; typical with monoblock boom; varies by arm length—common options ~10 ft 2 in or 12 ft 4 in) Max Digging Depth: 22 ft 8 in (shorter arm) to 24 ft 10 in (longer arm); up to ~26 ft 10 in in some references Max Digging Reach (at ground level): 34 ft 11 in to 36 ft 10 in Max Digging Reach: 35 ft 9 in to 37 ft 7 in Max Cutting Height: 37 ft 5 in to 38 ft 4 in Max Dumping Height: 27 ft 6 in to 28 ft 5 in Min Swing Radius: ~11 ft 1 in – 11 ft 2 in Max Vertical Wall Digging Depth: ~20 ft 2 in to 21 ft 6 in (or higher in some configs)

Yes

Yes

Yes

Yes