2006 DEERE 160C LC

2006

FF160CX046347

Used

Machine Highlights Year: 2006 Make: John Deere Model: 120C LC Cab Manual Thumb Auxiliary Hydraulics AC/Heat 109hp Max dig depth: 20ft 10in Operating weight: 36,110lbs Hours: TBD SN: FF160CX046347 Engine Type: John Deere 4045H with turbocharger and air-to-air charge air cooler; meets EPA and CARB emission non-road regulations Rated Power: 109 SAE net hp (81 kW) @ 2,300 rpm Cylinders: 4 Displacement: 276 cu. in. (4.5 L) Maximum net torque: 302 lb.-ft. (410 Nm) @ 1,400 rpm Fuel consumption, typical: 3.0 to 5.0 gal./hr. (11.4 to 18.9 L/h) Cooling fan: suction-type Electrical system: 24 volt with 45-amp alternator Batteries (two 12 volt): reserve capacity: 180 min. Off-level capacity: 100% (45 deg.) Hydraulic System Main pumps: two variable-displacement axial-piston Maximum flow: 2 x 39.0 gpm (2 x 148 L/min. Pilot pump.: one gear Maximum rated flow: 6.40 gpm (24.2 L/min.) Pressure setting: 570 psi (3930 kPa) System operating pressure Implement circuits: 4,980 psi (34 336 kPa) Travel circuits: 4,980 psi (34 336 kPa) Swing circuits: 4,410 psi (30 406 kPa) Oil filtration: one 10-micron full-flow return filter with by-pass / one pilot oil filter Swing Mechanism Swing speed: 0–13.6 rpm Swing torque: 29,850 lb.-ft. (40 500 Nm) Undercarriage Carrier rollers (per side): 2 Track Rollers (per side): 7 Shoes (per side): 43 Track Guides: front Track Adjustment: hydraulic Travel Speed: Low: 0-1.9mph High: 0-3.3mph Drawbar pull: 33,670lb Ground Pressure Data Average Ground Pressure: 5.46psi Capacities Fuel Tank: 74gal Cooling system: 28qt (26.5L) Engine lubrication, including filter: 15qt (14L) Hydraulic tank: 20gal Hydraulic system: 44.9gal Propel gearbox (each): 3.4qt (3.2L) Swing drive: 5qt (4.5L) Operating weight: 36,110lbs Operating information Max reach: 30ft 2in Maximum reach @ ground level: 29ft 8in Maximum digging depth: 20ft 10in Maximum cutting height: 29ft 6in Maximum dumping height: 21ft 5in Minimum swing radius: 9ft 7in Maximum vertical wall: 18ft 3in Tail swing radius: 8ft Dimensions Rear-end length/swing radius: 8ft Distance between idler/sprocket centerline: 10ft 2in Undercarriage length: 12ft 10in Counterweight clearance: 3ft 3in Overall height of cab: 9ft 5in Minimum ground clearance: 19in Blade lift height: 15in 2006 JOHN DEERE 160C LC CAB EXCAVATOR WITH MANUAL THUMB, AUXILIARY HYDRAULICS, AC/HEAT, 109HP, AND AN OPERATING WEIGHT OF 36,110LBS! SE HABLA ESPAÑOL! FINANCING AVAILABLE PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

74 gal

36,110 lb

Yes

Yes

Mechanical

5.46 psi

362 in

354 in

257 in

20 ft 10 in

Enclosed

Yes

Yes

109 HP

28 ft 1 in

8 ft 10 in

9 ft 5 in

36,110 lb