2021 KOMATSU PC88MR-11

2021

516

10223

Used

Machine Highlights Year: 2021 Make: Komatsu Model: PC88MR-11 Cab Straight Blade Manual Thumb Auxiliary Hydraulics Pin-on coupler Teeth bucket AC/Heat Hours: 516 SN: 10223 Warranty Emissions warranty until 10/28/2026 or 3,000 hours EXTENDED WARRANTY AVAILABLE FOR PURCHASE Ask one of our salesmen for more information! Engine Model Komatsu SAA3D95E-1* Type Water-cooled, 4-cycle, direct injection Aspiration Turbocharged, aftercooled, cooled EGR Number of cylinders 3 Bore 3.74” Stroke 4.52” Piston displacement 149.5 in3 Horsepower: 68hp Rated rpm 1,850 rpm Fan drive method for radiator cooling: Mechanicalwith viscous fan clutch Governor All-speed control, electronic Hydraulics Number of selectable working modes 6 Main pumps Type Variable displacement, axial position Pumps for Boom, arm, bucket, swing and travel circuits Maximum flow 42.4 gpm Type Fixed displacement gear Pumps for: Blade Maximum flow 17 gpm Supply for control circuit Self-reducing valve Hydraulic motors Travel 2 x axial piston motors with parking brake Swing 1 x axial piston motor with swing holding brake Drives and brakes Steering control Two levers with pedals Drive method Hydrostatic Maximum drawbar pull 68.1 kN 15,309 lbf 6,950 kgf Maximum travel speed High 3.1 mph Low 1.9 mph Service brake Hydraulic lock Parking brake Mechanical disc Swing system Drive method Hydraulic motor Swing reduction Planetary gear Swing circle lubrication Grease-bathed Swing lock Mechanical disc brake Swing speed 10 rpm Undercarriage Center frame X-frame leg Track frame Box-section Track type Sealed Track adjuster Hydraulic Number of shoes (each side) 39 Number of carrier rollers (each side) 1 Number of track rollers (each side) 5 Coolant (refilling) and lubricant capacity Fuel tank 33 gal Radiator 4.8 gal Engine 2.7 gal Final drive (each side) .29 gal Swing drive .74 gal Hydraulic tank 14.8 gal Operating weight: 19,290 lbs. Working forces Bucket digging force 13,781 lbs. Arm crowd force 8,161 lbs. Working Range Max. digging height 22'4" Max. dumping height 15'8" Max. digging depth 15'0 Max. vertical wall digging depth 10'3" Max. digging depth of cut for 8' (2,500 mm) level bottom 13'9" Max. digging reach 24'1" Max. digging reach at ground level 23'5" Min. swing radius 9'6" Dimensions Overall length 21'1" Overall height (to top of boom) 8'7" Overall width 7'8" Overall height (to top of cab) 9'0"/*8'9" Ground clearance, counterweight 2'7" Ground clearance, minimum 1'4" Tail swing radius 4'10" Track length on ground 7'4" 2021 KOMATSU PC88MR-11 CAB EXCAVATOR WITH STRAIGHT BLADE, MANUAL THUMB, PIN-ON COUPLER, AUXILIARY HYDRAULICS, TEETH BUCKET, AC/HEAT AND AN OPERATING WEIGHT OF 19,290LBS! EMISSIONS WARRANTY UNTIL 10/28/2028 OR 3,000 HOURS. EXTENDED WARRANTY AVAILABLE FOR PURCHASE. ASK ONE OF OUR SALESMEN FOR MORE INFORMATION! SE HABLA ESPAÑOL! FINANCING AVAILABLE PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

33 gal

19,290 lb

Yes

Yes

Mechanical

5.41 psi

265 in

188 in

13 ft 7 in

Enclosed

Yes

Yes

3.1 mph

68 HP

21 ft 1 in

7 ft 8 in

8 ft 7 in

19,290 lb